News
-
Plate Flange PN16 DN200
A plate flange DN200 PN16 refers to a specific type of flange used in piping systems. - DN200: This indicates the nominal diameter of the flange, which is 200 millimeters. “DN” stands for “Diameter Nominal,” a standard used to denote the size of pipes and fittings. - PN16:...Read more -
BS4504 PN10 DN100 A105 Flange
BS 4504 is a British Standard that specifies the dimensions, tolerances, and materials for flanges used in piping systems. The designation “PN16″ refers to the pressure rating of the flange, which indicates that it can handle a maximum pressure of 16 bar (approximately 232 psi) at a s...Read more -
Introduction to Tee
What is a Tee Tee is called tee pipe fittings, tee joints, etc,Used mainly to change the direction of fluid,Used in the main pipe to branch pipe,can be classified by pipe size，A tee has three openings, namely one inlet and two outlet; Or two imports, one export of a chemical pipe Type of ...Read more -
10″ A105 WNRF Flange 150#
10 inch, weld neck (WN) flange, A105 material, and 150# (150 lbs) pressure rating WN A105 150# Flange Specifications 1. Nominal Diameter: 10 inches 2. Pressure Rating: 150# (150 lbs) 3. Material: A105 (Carbon Steel) 4. Flange Type: Weld Neck (WN) with Raised Face (RF) 5. Dimensions: - Outside Dia...Read more -
Stainless Steel Flanges: A Comprehensive Guide
Understanding Stainless Steel Flanges: A Comprehensive Guide Introduction Stainless steel flanges are critical components in various piping systems, used to connect pipes, valves, pumps, and other equipment. They provide a reliable and leak-proof connection, making them essential in industries su...Read more -
Blind RF Flange
A blind RF (radio frequency) flange is a flange used in RF and microwave applications to create a sealed connection that does not allow signals or fluids to pass through. It is essentially a flat plate with no openings used to cover the end of a waveguide, coaxial line or other RF component.Read more -
The function and use of flange
A flange is a part connected to each other between shafts,it is used to connect pipelines,flanges can also be used on equipment for connection between two devices，The pipe flange refers to the flange of the pipe distribution pipe in the pipe device, and the import and export flange of the equipm...Read more -
Introduction to elbow
What is a elbow In a piping system, a bend is a pipe fitting that changes the direction of the pipe.Connect two pipes with the same or different diameters, and make the pipes turn 90°, 45°, 180° and various degrees. Type of elbow According to the Angle, there are 45° and 90° 180° three mos...Read more -
Specific Uses of Flanges in Various Applications
Specific Uses of Flanges in Various Applications Flanges are critical components in piping systems, serving as connectors between pipes, valves, pumps, and other equipment. Their design allows for easy assembly and disassembly, making them essential in various industries. Below, we delve into the...Read more -
Seamless Carbon Steel End Cap 4″ SCH40
A seamless carbon steel end cap is a type of fitting used in piping systems to close the end of a pipe. These end caps are made from carbon steel and are manufactured without any seams, which enhances their strength and durability. Here are some key points about seamless carbon steel end caps: Ch...Read more -
Carbon Steel Bend LR 90Deg
“carbon steel bend LR SCH40 90deg, a long radius (LR) 90-degree elbow fitting made from carbon steel, with a schedule 40 (SCH40) wall thickness. 1. Carbon Steel: A type of steel that contains carbon as the primary alloying element. It is commonly used in piping and structural applications d...Read more -
Applications of Stainless Steel Tees
Applications of Stainless Steel Tees Stainless steel tees are vital components in piping systems, designed to connect three sections of pipe at a right angle. They are widely used across various industries due to their strength, durability, and resistance to corrosion. Below, we explore the key a...Read more