How To Use Eccentric Reducer

To use an eccentric reducer, follow these steps:

Measure the pipe sizes: Determine the size of the larger and smaller pipes that you need to connect using the eccentric reducer.

Select the appropriate eccentric reducer: Choose an eccentric reducer that matches the size of the larger and smaller pipes.

Ensure that the eccentric reducer is made of a suitable material for the specific application, such as stainless steel, carbon steel, or PVC.

Prepare the pipes: Cut the larger and smaller pipes to the desired length, ensuring that the ends are clean and free from any debris or burrs.

Install the eccentric reducer: Slide the eccentric reducer onto the larger pipe, ensuring that the flat side of the reducer is aligned with the top of the pipe.

The offset portion of the reducer should be positioned to allow for the desired flow direction.

Connect the pipes: Insert the smaller pipe into the offset end of the eccentric reducer, ensuring a secure and tight fit.

Use appropriate fittings and fasteners to secure the connection if necessary.

Test the connection: Once the pipes are connected, perform a pressure test to ensure that the connection is secure and leak-free.

Sunny