Production News
-
What is the function of the tee?
What is the function of the tee? 1. The function of the tee: to prevent leakage of the pipeline and act as a seal. The main function of the tee is to change the direction of the fluid. 2. Tee: Generally used at the end of the pipeline to block the pipeline. Tees are pipe fittings and pipe connec...Read more -
Female 3000PSI NPT Equal Tee
A female NPT equal tee with a pressure rating of 3000 psi is a type of pipe fitting that has three female NPT (National Pipe Taper) threaded connections and is designed to handle pressures of up to 3000 pounds per square inch (psi). This type of tee fitting is commonly used in high-pressure pipi...Read more -
What is the difference between pipe cap and head?
Pipe caps are generally used for the ends of pipes, and heads are used for the upper and lower parts (vertical equipment) or left and right ends (horizontal equipment) of container equipment. Pipe caps generally have outer diameter sizes, such as 219, 273, 325 and so on. Pipe caps are also called...Read more -
What is a reducer?
The reducer, also known as the big and small head, is one of the chemical pipe fittings and is used to connect two different pipe diameters. It is further divided into concentric and eccentric heads. Function: Mainly used for connecting two pipes with different diameters Reducer material: includi...Read more -
Application of Carbon Steel Elbow
Carbon steel elbows are used in a wide range of applications, particularly in industrial piping systems. Some common applications include:Oil and Gas Industry: Carbon steel elbows are used in pipelines for transporting oil, gas, and other hydrocarbons from extraction sites to refineries and d...Read more -
How to Use Blind Flange
Inspect the blind flange for any defects before use to ensure its integrity.Clean the gasket surface of the pipe or fitting where the blind flange will be installed. Ensure it is free of any debris, rust, or old gasket material.Place the blind flange over the open end of the pipe or fitting, en...Read more -
What are the advantages and installation methods of SO flange?
slip on flange, the full name of neck flat welding steel pipe flange, is a flange in which steel pipes, pipe fittings, etc. are extended into the flange and connected to equipment or pipelines through fillet welds. Chinese name: slip on flange Foreign name: Slip-on Manufacturing pro...Read more -
What are the classification, production processes and applications of blind flanges?
The blind plate is mainly used to completely isolate the production medium to prevent the lax closing of the shut-off valve from affecting production or even causing accidents. The blind plate should be installed in the parts that require isolation, such as the equipment connection port, the fron...Read more -
What is a blind flange and what are the precautions?
What is a blind flange and what are the precautions? The formal name of the flange blind plate is Flangecover, and some are also called blind flanges or pipe plugs. It is a flange without a hole in the middle, used to seal the pipe opening. The function is the same as that of the head and pipe ca...Read more -
Stainless Steel Equal Tee
A stainless steel equal tee is a type of pipe fitting that has three openings and allows for the branching off of a pipe at a 90-degree angle. It is commonly used in plumbing and industrial applications where strength and corrosion resistance are important. Stainless steel is a popular materi...Read more -
The difference between 316L and 2205 in pipe fittings and flanges
The difference between 316L and 2205 in pipe fittings and flanges Compared with 316L stainless steel pipe fittings and flanges, the advantages of 2205 duplex stainless steel pipe fittings and flanges are as follows: 1. The yield strength of 2205 duplex stainless steel pipe fittings and flanges i...Read more -
SS347H Elbow
SS347H is a type of stainless steel that contains high levels of chromium and nickel. This type of stainless steel is often used in high-temperature applications and is known for its high resistance to corrosion and oxidation. An “elbow” in piping terms typically refers to a pipe fit...Read more