Pipe fittings, Tube fittings
-
ANSI B16.9 316\304\316L Cap CS Cap
Butt weld pipe fittings are a type of pipe fittings that are used in welding applications. They are designed to be welded directly to the pipe,
creating a strong and leak-proof connection. Butt weld fittings are available in various shapes and sizes, including elbows, tees, reducers,
and caps. They are commonly used in industries such as oil and gas, petrochemical, and power generation, where high-pressure and critical
applications are involved.
-
1/2 Inch To 24 Inch Carbon Steel Elbow Seamless CS Pipe Fitting
A carbon steel A234WPB elbow is a type of pipe fitting used to change the direction of a pipeline. It is made from carbon steel material,
specifically A234WPB grade, which provides excellent strength and durability. These elbows are typically used in high-temperature and
high-pressure applications in industries such as oil and gas, petrochemicals, and power generation. The A234WPB designation indicates
that the elbow conforms to the specifications set by the ASTM A234 standard.
-
Carbon Steel Pipe Fitting Unequal Tee
A234WPB is a specific type of carbon steel material for pipe fittings, and it is commonly used in oil and gas industries. A reducing tee
is a type of tee fitting where one of the branch outlets has a smaller diameter than the other two outlets. This allows for the connection
of pipes with different diameters, and it is used to reduce flow in one direction. An unequal tee, on the other hand, refers to a tee fitting
where all three outlets have different diameters. This type of tee is typically used in situations where there is a need to connect pipes of
different sizes
-
Carbon Steel Eccentric Reducer Concentric Reducer
A carbon steel concentric reducer and eccentric reducer are both types of pipe fittings used to connect two pipes of different sizes.
A concentric reducer has a symmetrical design, where the top and bottom ends are aligned and centered with each other. This creates a
smooth, even reduction in pipe diameter, allowing for a gradual flow transition between pipes.On the other hand, an eccentric reducer has
an asymmetrical design, where the top and bottom ends are offset from each other. This results in an eccentrically-shaped fitting, with one
side being larger in diameter than the other.Both types of reducers are commonly made from carbon steel, as it is a strong and durable material
suitable for various industrial applications, including piping systems. The choice between a concentric or eccentric reducer depends on the
specific requirements of the piping system, such as the need to maintain fluid flow characteristics, avoid air or gas accumulation,
or address spatial constraints.
-
A234WPB Reducing Tee Carbon Steel Pipe Fitting
A carbon steel reducing tee is a type of pipe fitting that is used to connect pipes of different sizes together in a pipe system.
It has three openings, with one inlet and two outlets that are of different sizes. The larger size is typically the inlet, while the two
smaller sizes are the outlets.Carbon steel reducing tees are commonly used in various industries, including oil and gas, chemical,
and construction. They are known for their strength and durability, as carbon steel is a robust material that can withstand high-pressure
and high-temperature conditions.These tees are available in different dimensions and specifications to suit different pipe systems.
They can be found in various sizes, ranging from a few inches to several feet in diameter.
-
8*6 Inch Carbon Steel Eccentric Reducer
A carbon steel eccentric reducer is a piping component used to connect pipes of different diameters.
The 8″×6″ carbon steel eccentric reducer is designed to connect an 8-inch diameter pipe to a 6-inch
diameter pipe.The eccentric reducer is called “eccentric” because it is designed in such a way that one
side of the reducer has a larger opening (in this case, the 8-inch side) while the other side has a smaller
opening (in this case, the 6-inch side). This design allows for a smooth and gradual transition of fluid flow
from a larger pipe to a smaller pipe or vice versa.Carbon steel is a commonly used material for piping
components due to its strength and durability.
-
SS304 316 Pipe Fitting Butt Welding Stainless Steel Reducing Outlet Tee
Products Butt weld carbon straight tee Carbon steel tee Stainless steel tee Size Seamless Pipe Fittings : 1/2″-24″ , DN15-DN600 ERW Pipe Fittings : 24″-72″ , DN600-DN1800. Customize Accepted Degree 45,90 Thickness Wall Thickness: sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140 , sch160, xxs, sch5s, sch20s, sch40s, sch80s
Max Wall Thickness: 150mmStandard ASME B16.9, ASTM A234, ASTM A420, ANSI B16.9/B16.25/B16.28; MSS SP-75 DIN2605-1/2615/2616/2617 JIS B2311-2009 JIS B2312-2009 JIS B2313-2009 EN 10253-1 ,EN 10253-2, etc We can produce as customers’ drawing and standard.
GB/T12459-2005 GB/T13401-2005 GB/T10752-2005
SH/T3408-1996 SH/T3409-1996
SY/T0609-2006 SY/T0518-2002 SY/T0518-2002
DL/T695-1999 GD2000 GD87-1101
HG/T21635-1987 HG/T21631-199Material Carbon Steel ASTM A234WPB,,A234WPC,A420WPL,St37.0,St35.8,St45.8,PG370,PT410,10#,20#,20G,23g,20R,Q235,16Mn,
16MnR,1Cr5Mo, 12CrMo, 12CrMoG, 12Cr1MoAlloy Steel A234WP12,A234WP11,A234WP22,A234WP5,A420WPL6,A420WPL3,1.7335,1.7380,
1.0488(1.0566),PA22,PA23,PA24,PA25,PL380
Alloy: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911Stainless Steel ASTM A403 WP304,304L,316,316L,321. 1Cr18Ni9Ti, 00Cr19Ni10,00Cr17Ni14Mo2, ect.,:
1.4301,1.4306,1.4401,1.4571,SUS304,SUS304L,SUS316,SUS316L,SUS321,
Super Duplex Stainless Steel S32750
Stainless Steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N Super Duplex Stainless Steel
ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347 -347H
Low Temperature Steel: ASTM/ASME A402 WPL 3-WPL 6
High Performance Steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70Surface Treatment Hot Galvanized Black Painting Transparent Oil, Anti-Rust Oil Application Petroleum, chemical, machinery, boiler,electric power, shipbuilding, construction, etc Package Wooden Pallet, Wooden Case, Customers’ Requirement Delivery Within 7-10 days in stock, customized as usual 20 days after receiving advance payment from custoners, also according to quantity
Payment Term T/T, L/C, D/P 
Testing and packingPackaging:1. Plywood pallet
2. Plywood case
3. According to customer’s requirementsThe tee is a pipe fitting and a pipe connector. The tee is usually used at the branch pipe of the main pipeline. The tee is divided into equal diameter and different diameter, and the ends of the equal diameter tee are all the same size; The size of the main pipe is the same, while the size of the branch pipe is smaller than that of the main pipe. For the use of seamless pipes to manufacture tee, there are currently two commonly used processes: hydraulic bulging and hot pressing. Divided into electric standard, water standard, American standard, German standard, Japanese standard, Russian standard, etc. -
ASME B16.9 China Supply Pipe End Cap 316/316L Sch40s Stainless Steel Cap in Pipe Fitting
Products Butt weld carbon cap Butt weld Stainless steel cap Size Seamless Pipe Fittings : 1/2″-24″ , DN15-DN600 ERW Pipe Fittings : 24″-72″ , DN600-DN1800. Customize Accepted Thickness SCH10,SCH20,SCH30,STD SCH40, SCH60, XS, SCH80., SCH100, SCH120, SCH140, SCH160, XXS.
Standard ASME B16.9, ASTM A234, ASTM A420, ANSI B16.9/B16.25/B16.28; MSS SP-75 DIN2605-1/2615/2616/2617 JIS B2311 ,2312,2313 EN 10253-1 ,EN 10253-2, etc We can produce as customers’ drawing and standard. Material Carbon Steel ASTM A234WPB,,A234WPC,A420WPL,St37.0,St35.8,St45.8,PG370,PT410,10#,20#,20G,23g,20R,Q235,16Mn, 16MnR,1Cr5Mo, 12CrMo, 12CrMoG, 12Cr1Mo
Alloy Steel A234WP12,A234WP11,A234WP22,A234WP5,A420WPL6,A420WPL3,1.7335,1.7380, 1.0488(1.0566),PA22,PA23,PA24,PA25,PL380
Stainless Steel ASTM A403 WP304,304L,316,316L,321. 1Cr18Ni9Ti, 00Cr19Ni10,00Cr17Ni14Mo2, ect. 1.4301,1.4306,1.4401,1.4571,SUS304,SUS304L,SUS316,SUS316L,SUS321
Surface Treatment Hot Galvanized Black Painting Transparent Oil, Anti-Rust Oil Application Petroleum, chemical, machinery, boiler,electric power, shipbuilding, construction, etc Package Wooden Pallet, Wooden Case, Customers’ Requirement Delivery Within 7-10 days in stock, customized as usual 20 days after receiving advance payment from custoners, also according to quantity
ApplicationLow and middle pressure fluid pipeline, boiler, petroleum and natural gas industry, drilling, chemical industry, electric industry, shipbuilding, fertilizer equipment and pipeline, structure, petrochemical, pharmaceutical industry.
Norminal Pipe Size Outside Diameter at Bevel Length Limiting Wall Thickness For Length E DN Series A Series B E E1 15 21.3 18 25 - - 20 26.9 25 25 - - 25 33.7 32 38 - - 32 42.4 38 38 - - 40 48.3 45 38 - - 50 60.3 57 38 44 5.5 65 76.1 76 38 51 7.0 80 88.9 89 51 64 7.6 500 508.0 529 229 254 12.7 .. .. .. .. .. .. ProductionProduction process:
forming by cold or hot processing methods such as bending, extrusion, pushing, molding, machining, etc.
Application industries:
electric power, oil and gas, petrochemical, chemical, shipbuilding, heating, papermaking, metallurgy, et -
BW Pipe Fitting Elbow
A BW pipe fitting elbow refers to a butt weld (BW) pipe fitting that is shaped in the form of an elbow.
It is used to connect sections of pipe at 90-degree or 45-degree angles, redirecting the flow of fluids or gases.
BW pipe fitting elbows are commonly made of materials such as carbon steel, stainless steel, or alloy steel,
and they are available in various sizes and wall thicknesses to suit different piping systems.
The butt welding connection ensures a strong and leak-free joint.
-
Alloy Steel Pipe Fittings Caps
Alloy steel pipe fittings caps are a type of pipe fitting used to seal the end of a pipe. They are typically made from alloy steel,
which offers high strength and corrosion resistance. Alloy steel pipe fittings caps come in various sizes and end connections to
fit different pipe dimensions and systems. They are commonly used in industrial applications where high pressure and temperature
conditions are present, such as oil and gas, petrochemical, and power generation industries.
-
Seamless Stainless Steel Carbon Steel Reducer Tee Butt Welding Fitting Tee
Seamless Stainless Steel Reducer Tee Butt Welding Fitting Tee
Product DescriptionProducts Butt weld carbon straight tee Carbon steel tee Stainless steel tee Size Seamless Pipe Fittings : 1/2″-24″ , DN15-DN600 ERW Pipe Fittings : 24″-72″ , DN600-DN1800. Customize Accepted Degree 45,90 Thickness Wall Thickness: sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140 , sch160, xxs, sch5s, sch20s, sch40s, sch80s
Max Wall Thickness: 150mmStandard ASME B16.9, ASTM A234, ASTM A420, ANSI B16.9/B16.25/B16.28; MSS SP-75 DIN2605-1/2615/2616/2617 JIS B2311-2009 JIS B2312-2009 JIS B2313-2009 EN 10253-1 ,EN 10253-2, etc We can produce as customers’ drawing and standard.
GB/T12459-2005 GB/T13401-2005 GB/T10752-2005
SH/T3408-1996 SH/T3409-1996
SY/T0609-2006 SY/T0518-2002 SY/T0518-2002
DL/T695-1999 GD2000 GD87-1101
HG/T21635-1987 HG/T21631-199Material Carbon Steel ASTM A234WPB,,A234WPC,A420WPL,St37.0,St35.8,St45.8,PG370,PT410,10#,20#,20G,23g,20R,Q235,16Mn,
16MnR,1Cr5Mo, 12CrMo, 12CrMoG, 12Cr1MoAlloy Steel A234WP12,A234WP11,A234WP22,A234WP5,A420WPL6,A420WPL3,1.7335,1.7380,
1.0488(1.0566),PA22,PA23,PA24,PA25,PL380
Alloy: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911Stainless Steel ASTM A403 WP304,304L,316,316L,321. 1Cr18Ni9Ti, 00Cr19Ni10,00Cr17Ni14Mo2, ect.,:
1.4301,1.4306,1.4401,1.4571,SUS304,SUS304L,SUS316,SUS316L,SUS321,
Super Duplex Stainless Steel S32750
Stainless Steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N Super Duplex Stainless Steel
ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347 -347H
Low Temperature Steel: ASTM/ASME A402 WPL 3-WPL 6
High Performance Steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70Surface Treatment Hot Galvanized Black Painting Transparent Oil, Anti-Rust Oil Application Petroleum, chemical, machinery, boiler,electric power, shipbuilding, construction, etc Package Wooden Pallet, Wooden Case, Customers’ Requirement Delivery Within 7-10 days in stock, customized as usual 20 days after receiving advance payment from custoners, also according to quantity
Payment Term T/T, L/C, D/P ProductionThe tee is a pipe fitting and a pipe connector. The tee is usually used at the branch pipe of the main pipeline. The tee is divided into equal diameter and different diameter, and the ends of the equal diameter tee are all the same size; The size of the main pipe is the same, while the size of the branch pipe is smaller than that of the main pipe. For the use of seamless pipes to manufacture tee, there are currently two commonly used processes: hydraulic bulging and hot pressing. Divided into electric standard, water standard, American standard, German standard, Japanese standard, Russian standard, etc.
-
1/2*3 carbon steel pipe nipples
Mild steel pipe nipples are short sections of pipe made from mild steel, typically used to connect other fittings or pipes in plumbing or piping systems.
They are often threaded at both ends to facilitate connections.
Sunny