Pipe fittings, Tube fittins
-
Carbon steel pipe nipple
Standard black and galvanized nipples come in pipe sizes from 1/8” to 8” and lengths from close to 12” long.
Howell’s in-house pipe shop can manufacturer special non-standard pipe nipple lengths. -
Black pipe nipple
Black pipe nipple is made of carbon steel pipe, and face is black, thread standard is ASTM
-
90D elbow
Carbon Steel Pipe Fittings Elbow could be a most common sort of CS fitting utilized to connect pipe or tubing to permit a alter of direction. Carbon Steel Elbows closes may be machined for butt welding, threaded, or socketed, so the elbows are comprise of butt weld, thread elbow, attachment elbow, and other arrangement.
-
Carbon steel nipple
We supply both black and galvanized welded steel nipples in 15 diameters from 1/8″ to 6″ and with different lengths ranging from Close up to 12″. Available individually or in pre-packaged assortments, we also offer a full selection of ready cut welded steel pipes in the same diameters lengths ranging from 18″ up to 72″. All galvanized are zinc coated for use in water applications complying with the NSF 372 lead-free requirements.
-
Steel tee
Steel tee is widely used in pipe networks for convey liquids and gases
-
Steel elbow
Manufacturer of Elbow CS Sch 40, CS 45 Degree Elbow, Carbon Steel 90 Degree Elbow
-
Steel nipple
This Grainger Approved nipple has a weld bead on the inside and is NPT threaded at both ends. Model is interchangeable with galvanized cast iron or steel and is suitable for low-pressure plumbing applications including air, water, oil, natural gas, and steam. Certified for use in potable water applications.
-
Carbon steel elbow
The elbow is a pipe fitting and a pipe connector. The elbow is usually used at the branch pipe of the main pipeline. Divided into electric standard, water standard, American standard, German standard, Japanese standard, Russian standard, etc.
-
Industrial Steel Bends
Bends are bent using a complete set of bending dies. No matter what kind of machinery and equipment, most of them use bends. We produce bends using the most advanced technology. Our bends include carbon steel bends, alloy bends , stainless steel elbow, low temperature steel elbow, high-performance steel elbow, etc. It is mainly used for oil, gas, fluid infusion, etc., and it occupies a very important position in aircraft and its engines.
Size
Airless Elbow: 1/2″～24″ DN15～DN600 Butt Weld Elbow: 6″～60″ DN150～DN1500 -
Industrial Steel Long Radius Elbow
Carbon Steel: ASTM/ASME A234 WPB-WPC, ST37,
Alloy: ST52, 12CrMo, 15CrMo, WP 1-WP 12, WP 11-WP 22, WP 5-WP 91-WP 911
Stainless Steel: ASTM/ASME A403 WP 304- 304L-304H-304LN-304N
ASTM/ASME A403 WP 316-316L-316Ti… -
Industrial Steel Short Radius Elbow
Carbon Steel: ASTM/ASME A234 WPB-WPC
Alloy: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
Stainless Steel: ASTM/ASME A403 WP 304-304L-304H-304LN -304N
Low Temperature Steel: ASTM/ASME A402 WPL 3-WPL 6. .. -
Industrial Steel Con And Ecc Reducer
The reducer is one of the chemical pipe fittings, which is used for the connection of two different pipe diameters. The forming process of the reducer is usually reducing diameter pressing, expanding diameter pressing or reducing diameter and expanding diameter pressing. The pipe can also be formed by stamping. The reducer is divided into concentric reducer and eccentric reducer. We produce reducers of different materials, such as carbon steel reducers, alloy reducers, stainless steel reducers, Low temperature steel reducer, high performance steel reducer, etc., can meet your different choices.
