Products
-
2″ Sch80 ANSI B16.9 Lr 90deg Elbow A234wpb
Carbon Steel Pipe Fittings Elbow could be a most common sort of CS fitting utilized to connect pipe or tubing to permit a alter of direction, more often than not a 90° or 45° angle, though Elbow Carbon Steel is additionally utilized in a piping framework. Carbon Steel Elbows closes may be machined for butt welding, threaded, or socketed, so the elbows are comprise of butt weld, thread elbow, attachment elbow, and other arrangement.
-
High Quality ANSI Stainless Steel Socket Weld Flange From Mark
Flange, which is called flange flange or flange. The flange is a part connected between the shaft and the shaft, used for the connection between the end of the pipe; Also used in the equipment inlet and outlet flange, for the connection between two equipment
Application : used for chemical industry , oil ,gas industry etc.
-
Stainless Seamless Carbon Steel Pipe Fitting Equal Tees
Carbon steel tee belongs to one of the pipe fittings products, the application in the market is relatively wide, and in terms of its actual effect can also be found to have the advantages of carbon steel tee, including stable parameters and later actual service life and so on can help it to win the favor of users and praise.
Application : used for chemical industry , oil ,gas industry etc.
-
Threaded Fittings NPT Forged Fittings 1/2″
Threaded connection is a way to thread the tee joint and the pipe together.
This connection method needs to open a threaded hole at the interface between the three-way pipe joint and the pipeline,
and then screw the threaded connector into the hole to make it tightly connected to the pipeline.
The advantage of threaded connection is that it is easy to install, easy to disassemble and replace,
and is suitable for low pressure, low temperature and non-corrosive media.
Application : used for chemical industry , oil ,gas industry etc.
-
Concentric /Eccentric Reducer Butt Weld Pipe Fitting
Reducing pipe (size head) is a pipe fitting used for reducing the diameter of a pipe. The commonly used forming process is reducing pressing, expanding pressing or reducing plus expanding pressing, and stamping can also be used for some specifications of reducing tubes.
Application : used for chemical industry , oil ,gas industry etc.
-
Carbon Steel Socket Weld Fittings Customize
Tee also known as pipe fittings tee or tee pipe fittings, tee joint, etc. Used mainly to change the direction of the fluid, used in the main pipe branch. It can be classified by pipe size. Generally used carbon steel, cast steel, alloy steel, stainless steel, etc
Application : used for chemical industry , oil ,gas industry etc.
-
Carbon Seamless Stainless Steel Pipe Fittings Reducer Tee Butt Welding Tee
Carbon steel tee belongs to one of the pipe fittings products, the application in the market is relatively wide, and in terms of its actual effect can also be found to have the advantages of carbon steel tee, including stable parameters and later actual service life and so on can help it to win the favor of users and praise.
Application : used for chemical industry , oil ,gas industry etc.
-
Carbon Steel A234WPB Cap Pipe Fitting
Carbon steel head (pipe cap), also known as plug, cap, pipe cap, bulkhead, used to close the pipeline, the same role as the pipe plug, but the pipe cap can be directly screwed on the pipe, no other pipe fittings. The tube cap comprises a convex tube cap, a cone shell, a reducing section, a flat cap and a tightening mouth.
Carbon steel head materials are mainly Q235,20#, A3, 16 manganese, Q345B, 45 steel and so on. The standard is GB/T25198-2010(pressure vessel head standard), and pipeline standard GB/T12459-2005,GB/T13401-2005 and so on.
Application : used for chemical industry , oil ,gas industry etc.
-
ANSI ASME B16.9 Carbon Steel Elbow Stainless Pipe Fitting Equal Tee
Stainless steel tee for pipe fittings, pipe connectors. Used in the main pipe to branch. Stainless steel tee has equal diameter and reduced diameter, equal diameter tee nozzle end are the same size; The main pipe size of the reduced tee is the same, and the tube size of the branch pipe is smaller than the main pipe size.
Application : used for chemical industry , oil ,gas industry etc.
-
1 1/2″ DN40 Carbon Steel Seamless Butt Weld High Pressure Cap
Tee is a pipe fitting used at the branch of a pipe. For the use of seamless tube manufacturing tee, usually the process of hydraulic expansion and hot pressing forming two, hydraulic expansion and hot pressing forming
Application : used for chemical industry , oil ,gas industry etc.
-
Seamless Butt Weld Fittings Eccentric Reducers ASME B16.9/En10253/ ISO3419
Reducing pipe (size head) is a pipe fitting used for reducing the diameter of a pipe. The commonly used forming process is reducing pressing, expanding pressing or reducing plus expanding pressing, and stamping can also be used for some specifications of reducing tubes.
Application : used for chemical industry , oil ,gas industry etc.
-
Weld Neck Slip On Bllind Flange Supplier
Flange, which is called flange flange or flange. The flange is a part connected between the shaft and the shaft, used for the connection between the end of the pipe; Also useful in equipment inlet and outlet flange, used for connection between two equipment, such as reducer flange. Flange connection or flange joint, refers to the flange, gasket and bolt three mutually connected as a group of sealing structure detachable connection. Pipe flanges refer to the flanges used in pipe fittings and the import and export flanges used in equipment.
Application : used for chemical industry , oil ,gas industry etc.
