Products
-
Industrial Wedge Gate Valve Z41h-10/16q
Main Parts And Materials
Valve Body /bonnet：Gray cast iron, nodular cast iron
Ball seal：2Cr13
Valve RAM：Cast steel+Surfacing stainless steel
Valve stem：Carbon steel, Brass ,stainless steel
Stem nut: Nodular cast iron
Hand wheel: Grey cast iron ,Nodular cast iron
Usage: The valve is widely used in petroleum, chemical, pharmaceutical, electric power and other industries, at the nominal pressure ≤1. 6Mpa steam, water and oil medium pipelines are used for opening and closingApplication : chemitry industry , oil and gas industry etc.
-
Open rod soft sealing gate valve Z41X-10Q/16Q/25Q
Main Parts And Materials
Valve body / bonnet：Nodular cast iron
Valve stem：Stainless steel
Valve RAM：Nodular cast iron+NBR, nodular cast iron+EPDM
Stem nut: Copper, Nodular cast ironUsage: The soft sealing gate valve uses the micro deformation and compensation effect produced by the elastic gate when it is stressed to achieve good sealing effect. When in use, the medium temperature is not higher than 80 ° C. It can be widely used in construction, food, chemical energy, water supply and drainage and other industries. It can be used for regulation and closure of pipelines and equipment
Application : chemitry industry , oil and gas industry etc.
-
Industrial Steel Four-way Pipes
The spool is a kind of pipe fitting used at the branch of the pipeline. The spool is divided into equal diameter and different diameter. The ends of the equal diameter spools are all the same size; The size of the nozzle of the branch pipe is smaller than that of the main pipe. For the use of seamless pipes to manufacture spools, there are currently two commonly used processes: hydraulic bulging and hot pressing. The efficiency is high; the wall thickness of the main pipe and the shoulder of the spool are increased. Due to the large tonnage of equipment required for the hydraulic bulging process of the seamless spool, the applicable forming materials are those with relatively low cold work hardening tendency.
Application : chemitry industry , oil and gas industry etc.
-
Industrial Steel Short Radius Elbow
The threaded joint refers to the pipe connector with thread, is the most common kind of pipe fittings in industry and life, the threaded joint makes the connection of the pipe more simple, disassembly and replacement is also easier, greatly saving the cost of pipe connection. Carbon steel elbows are metal pipe fittings that change the direction of the lines on carbon steel pipes. The connection mode is wire buckle and welding. According to the Angle, 45° and 90°180° are the most commonly used,
Application : chemitry industry , oil and gas industry etc.
-
Industrial Steel Flat Welded Flange With Neck
These flat welding flanges are ASME B16.5 flat welding flange, ASME B16.47 flat welding flange, DIN 2634 flat welding flange, DIN 2635 flat welding flange, DIN 2630 flat welding flange, DIN 2636 flat welding method Flanges, DIN 2631 flat welding flanges, DIN 2637 flat welding flanges, etc. Flanges are parts that connect pipes to each other and are connected to pipe ends. There are holes on the flange, and bolts make the two flanges tightly connected. Gaskets are used to seal between flanges. Flat welding flanges are suitable for steel pipe connections with a nominal pressure not exceeding 2.5MPa. The sealing surfaces of flat welding flanges can be made of smooth, concave-convex and tongue-and-groove types.
Application : chemitry industry , oil and gas industry etc.
-
Industrial Steel Flanging Steel Stub Ends
Flanging is formed by turning the outer edge or hole edge of the blank or semi-finished product into a vertical edge along a certain curve. According to the shape of the blank and the edge of the workpiece, flanging can be divided into inner hole (round hole or non-circular hole) flanging , plane outer edge flanging and curved surface flanging, etc. Flanging can replace the deep drawing process of some complex parts, improve the plastic flow of the material to avoid cracking or wrinkling. We can supply carbon steel flanging, alloy flanging, stainless steel flanging Edges etc. These products comply with ASME B16.9, ISO, API, EN, DIN, BS, JIS, GB etc.
Application : chemitry industry , oil and gas industry etc.
-
Industrial Steel Bends
Bends are bent using a complete set of bending dies. No matter what kind of machinery and equipment, most of them use bends. We produce bends using the most advanced technology. Our bends include carbon steel bends, alloy bends , stainless steel elbow, low temperature steel elbow, high-performance steel elbow, etc. It is mainly used for oil, gas, fluid infusion, etc., and it occupies a very important position in aircraft and its engines. Size Airless Elbow: 1/2″～24″ DN15～DN600 Butt Weld Elbow: 6″～60″ DN150～DN1500
Application : chemitry industry , oil and gas industry etc.
-
Stainless steel ball valve Q41F-16P/25P
Main Parts And Materials
Left valve body：CF8
Ball valves：F304
Sealing ring: PTFE
Right valve body：CF8
Valve stem: F304
Valve handle: QT450
Usage: This valve is applicable to the pipeline of water, steam, oil and nitric acid corrosive medium with temperature < 150 ° for opening and closing. Its biggest advantage is that it can be opened and closed quicklyApplication : chemitry industry , oil and gas industry etc.
-
Soft seal gate valve Z45X-10Q/16Q/25Q
Valve body / bonnet：nodular cast iron
Valve stem：stainless steel
Gate of valve：nodular cast iron+NBR, nodular cast iron+EPDM
Stem nut: Brass, Nodular cast ironUsage: Gate valve of soft seal attains uses the micro deformation and compensation effect produced by the elastic gate when it is stressed to achieve good sealing effect. When in use, the medium temperature is not higher than 80 ° C. It can be widely used in construction, food, chemical energy, water supply and drainage and other industries. It can be used for regulation and closure of pipelines and equipment
Application : chemitry industry , oil and gas industry etc.
-
Wedge gate valve Z41T/W-10/16Q
Main Parts And Materials
Valve Body / RAM / bonnet：Gray cast iron, nodular cast iron
Valve stem：Carbon steel, Brass ,stainless steel
Middle port gasket: Xb300
Stem nut: nodular cast iron , Brass
Hand wheel: Grey cast iron ,Nodular cast iron
Usage: The valve is widely used in petroleum, chemical, pharmaceutical, electric power and other industries, at the nominal pressure ≤1. 6Mpa steam, water and oil medium pipelines are used for opening and closingApplication : chemitry industry , oil and gas industry etc.
-
Industrial Steel Carbon Steel Stainless Steel Blind Flange
Blind flanges are made of carbon steel,stainless steel and alloy steel,etc.They are used to seal or block off a pipe, like a cover or cap. We can provide a wide range of blind flanges,in accordance to standards like ASME B16.5,ASME B16.47,DIN 2634,DIN 2636,and so on.
Application : chemitry industry , oil and gas industry etc.
-
Industrial Steel Plate Weld Flange A105 Flange
Our plate weld flanges are made of carbon steel,alloy steel,stainless steel,and high performance steel.They are manufactured,strictly according to ISO9001 quality management system,and in accordance with standards like ASME B 16.5.ASME B 16.47,DIN 2634,DIN 2630,and DIN 2635,and so on.Thus,you can feel free to choose them.
Application : chemitry industry , oil and gas industry etc.