Products
-
A234WPB Seamless Pipe Fitting Elbow Bend
Carbon steel pipe fitting elbows are commonly used in piping systems to allow for changes in the direction of the pipeline.
They are designed to connect two pipes at an angle and create a smooth flow path, eliminating the need for unnecessary bends
or turns.Carbon steel is a popular choice for pipe fittings due to its durability, strength, and cost-effectiveness. It is known for its
high tensile strength and resistance to wear, making it suitable for various applications, including water, oil, gas, and steam pipelines
-
Pipe Fitting Carbon Steel Stainless Steel Butt Weld Fittings 6″ Sch80 ANSI B16.9 Lr 90deg Elbow A234wpb
Product DescriptionSize: Seamless elbow:1/2″24″ DN15DN600, etc.
Welded Elbow: 4″72″ DN150DN1900, etc.Varieties: SGP, STD, SCH40, SCH80, SCH160, XS, XXS, SCH5S, SCH10S, SCH40S, SCH80S, etc. Radius: 1d-10d ansi, asme, API5l, din, jis, bs, GB, etc.
product angle 0°~180°Thinkness: sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100,sch120, sch140, sch160, xxs, sch5s, sch20s, sch40s , sch80s, etc.
Wall Thickness: 2-150mmMaterial: Carbon steel, alloy steel, stainless steel 304, stainless steel 316, SDSS WCB, LCB, LC3, WC5, WC9, C5, C12, CA6NM, CA15, CF8M, CF8C, CF8, CF3, CF3M, CN7M, M35-1, N7M, CW6M, CY40, etc. Material
Carbon Steel : ASTM/ASME A234 WPB, WPC
Alloy: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
Stainless Steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N S32750 SDSS 2205
ASTM/ASME A403 WP 316-316L-316H-316LN-316N
316Ti ASME A860 WPHY 42-46-52-60-65-70
Long radius elbow bendCarbon Steel: ASTM/ASME A234 WPB-WPC, ST37,Alloy: ST52, 12CrMo, 15CrMo, WP 1-WP 12, WP 11-WP 22, WP 5-WP 91-WP 911Stainless Steel: ASTM/ASME A403 WP 304- 304L-304H-304LN-304NASTM/ASME A403 WP 316-316L-316Ti…Short radius elbow bendCarbon Steel: ASTM/ASME A234 WPB-WPCAlloy: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911Stainless Steel: ASTM/ASME A403 WP 304-304L-304H-304LN -304NLow Temperature Steel: ASTM/ASME A402 WPL 3-WPL 6.
ProductionPipe elbow, steel pipe elbow, carbon steel pipe elbow bend
STANDARD ANSI, ASME, API5L, DIN, JIS, BS, GBWe can also produce according to drawing by customers.
-
Carbon Steel Pipe Fittings Cap
Carbon steel pipe fittings cap is a type of pipe fitting used to close the end of a carbon steel pipe. It is designed to provide a tight seal and
prevent the flow of fluids or gas through the pipe. Carbon steel pipe fittings caps are typically made from carbon steel material, which is
known for its durability, strength, and resistance to corrosion. These caps can come in various sizes and dimensions to fit different pipe diameters,
and they are commonly used in industrial applications such as oil and gas pipelines, plumbing systems, and chemical processing plants.
-
ANSI B16.5/DIN/En1092/GOST/BS Forged/Forging Fitting Carbon/Stainless Steel Pn10/16 Weld neck /Blind/Slip on/Flat Plate/Socket Pipe Flange
Product Description
ANSI B16.5/DIN/En1092/GOST/BS Forged/Forging Fitting Carbon/Stainless Steel Pn10/16 Welding/Weld Neck/Threaded/Blind/Slip on/Flat Plate/Socket RF/FF Pipe Flange
Product Description
1.Material: Stainless steel 304/304L,316/316L,321,ect. Carbon steel A105/Rst37.2/C22.8/Q235, etc.
2.Size:1/2″-24″
3.Pressure:150lbs-2500lbs PN0.6-PN16.0
4.Facing:RF/RJ/ FF/MF/TG/
5.Standard:ANSI(ASME)16.5 16.47/DIN/JIS/UNI/…
6.Flanges of welding neck, socket welding, threaded, blind, slip on
7. Production process : raw material–cutting–heating–forging–heat treatment–maching–inspection.-washing-ex-working.
-
SS316L Stainless Steel Pipe Fitting Elbow
A SS316L stainless steel elbow is a type of pipe fitting that is used to connect two pipes at an angle. It is made of SS316L
stainless steel, which is a low carbon, molybdenum-bearing austenitic stainless steel with improved corrosion resistance
compared to standard stainless steels. SS316L stainless steel is often used in applications where resistance to pitting and
crevice corrosion is required, such as in the chemical, petrochemical, and food processing industries. The SS316L stainless
steel elbow is designed to provide a strong and leak-proof connection between pipes, while also ensuring durability
and longevity in corrosive environments.
-
ANSI B16.9 316\304\316L Cap CS Cap
Butt weld pipe fittings are a type of pipe fittings that are used in welding applications. They are designed to be welded directly to the pipe,
creating a strong and leak-proof connection. Butt weld fittings are available in various shapes and sizes, including elbows, tees, reducers,
and caps. They are commonly used in industries such as oil and gas, petrochemical, and power generation, where high-pressure and critical
applications are involved.
-
1/2 Inch To 24 Inch Carbon Steel Elbow Seamless CS Pipe Fitting
A carbon steel A234WPB elbow is a type of pipe fitting used to change the direction of a pipeline. It is made from carbon steel material,
specifically A234WPB grade, which provides excellent strength and durability. These elbows are typically used in high-temperature and
high-pressure applications in industries such as oil and gas, petrochemicals, and power generation. The A234WPB designation indicates
that the elbow conforms to the specifications set by the ASTM A234 standard.
-
Carbon Steel Pipe Fitting Unequal Tee
A234WPB is a specific type of carbon steel material for pipe fittings, and it is commonly used in oil and gas industries. A reducing tee
is a type of tee fitting where one of the branch outlets has a smaller diameter than the other two outlets. This allows for the connection
of pipes with different diameters, and it is used to reduce flow in one direction. An unequal tee, on the other hand, refers to a tee fitting
where all three outlets have different diameters. This type of tee is typically used in situations where there is a need to connect pipes of
different sizes
-
Carbon Steel Eccentric Reducer Concentric Reducer
A carbon steel concentric reducer and eccentric reducer are both types of pipe fittings used to connect two pipes of different sizes.
A concentric reducer has a symmetrical design, where the top and bottom ends are aligned and centered with each other. This creates a
smooth, even reduction in pipe diameter, allowing for a gradual flow transition between pipes.On the other hand, an eccentric reducer has
an asymmetrical design, where the top and bottom ends are offset from each other. This results in an eccentrically-shaped fitting, with one
side being larger in diameter than the other.Both types of reducers are commonly made from carbon steel, as it is a strong and durable material
suitable for various industrial applications, including piping systems. The choice between a concentric or eccentric reducer depends on the
specific requirements of the piping system, such as the need to maintain fluid flow characteristics, avoid air or gas accumulation,
or address spatial constraints.
-
A234WPB Reducing Tee Carbon Steel Pipe Fitting
A carbon steel reducing tee is a type of pipe fitting that is used to connect pipes of different sizes together in a pipe system.
It has three openings, with one inlet and two outlets that are of different sizes. The larger size is typically the inlet, while the two
smaller sizes are the outlets.Carbon steel reducing tees are commonly used in various industries, including oil and gas, chemical,
and construction. They are known for their strength and durability, as carbon steel is a robust material that can withstand high-pressure
and high-temperature conditions.These tees are available in different dimensions and specifications to suit different pipe systems.
They can be found in various sizes, ranging from a few inches to several feet in diameter.
-
Blind Flange Stainless Steel Flange
A stainless steel blind flange is a type of flange that is made entirely from stainless steel. It is used to seal the end of a pipe or vessel
in order to prevent the flow of fluid or gas.Stainless steel blind flanges are commonly used in applications where corrosion resistance is crucial.
Stainless steel is known for its excellent resistance to corrosion, making it ideal for use in industries such as oil and gas, chemical processing,
water treatment, food processing, and more.There are different grades and types of stainless steel blind flanges available, each with its own unique
properties and suitability for specific applications. Some common types include:Stainless Steel 304 Blind Flange: This is the most commonly used
stainless steel grade that provides good corrosion resistance and is suitable for general-purpose applications.Stainless Steel 316 Blind Flange:
This grade offers better corrosion resistance than 304 stainless steel and is particularly suitable for applications where the flange will be exposed
to harsh environments, such as high chloride levels or acidic conditions.Stainless Steel 316L Blind Flange: Similar to 316 stainless steel,
316L is a low-carbon variant that offers improved corrosion resistance and greater resistance to sensitization.
Stainless Steel 904L Blind Flange: This highly corrosion-resistant grade is used in extreme environments,
such as in the chemical and petrochemical industries, where resistance to acids, chlorides, and other corrosive substances is critical.
Stainless steel blind flanges are available in various sizes, pressure ratings, and flange face types, such as raised face (RF) or flat face (FF).
It is important to choose the appropriate size, pressure rating, and material grade that suits your specific application requirements.
-
8*6 Inch Carbon Steel Eccentric Reducer
A carbon steel eccentric reducer is a piping component used to connect pipes of different diameters.
The 8″×6″ carbon steel eccentric reducer is designed to connect an 8-inch diameter pipe to a 6-inch
diameter pipe.The eccentric reducer is called “eccentric” because it is designed in such a way that one
side of the reducer has a larger opening (in this case, the 8-inch side) while the other side has a smaller
opening (in this case, the 6-inch side). This design allows for a smooth and gradual transition of fluid flow
from a larger pipe to a smaller pipe or vice versa.Carbon steel is a commonly used material for piping
components due to its strength and durability.